Subject | Text |
Can't adjust red convergence APEX projection TV | I'm working on an APEX model GB5108 rear projection television. The red picture is pinched slightly |
| The excessive heat, probably from the output stages is likely due to excess current through the driv |
|
| Hi folks just want to thank you for your help and quick responses. I took out the chassic over the w |
SONY SHUTDOWN PROBLEM | Dear sirs, your problem with the sony power supply is not that bad, The tech with the exp, that told |
V700 compaq | search for "schematic diagram Daewoo CMC-710 b,the main circuits are useful, but de component number |
| Hi m8 thanks for your time
I'm not sure I understand what you mean, if you could be a little more |
| [quote:4cc44662a7="sbeck"]The power supply is probably bad and it makes 3 attempts at power up and g |
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
| You can convert AC to DC by using a rectifier and a power filter. The factors that depend on these t |
Panasonic CT32G32V | Does anyone have schematics for this set.
Especially Degauss circuit/components
Degauss ciol p |
Daewoo Plasma dp42 dead | I have a plasma screen which gave up the ghost. it simply wont turn on! apparently there is common p |
| 1) Resolder all the output transistors solder joints and any other intermediate transistor stages th |
inner workings of the digital photo keyring | Hi, i'm new to the forum and have been trawling through the raft of info : )
i run a small blog o |
klipsch Promedia 5.1 schematics | I have read all the forums on Klipsch and other related sites. I found quite a few burnt components |
| Hi Matt,
Had a really busy weekend and lost your thread in the pile of other threads!
From what yo |